==========================================================================
* 9/21/2004: 8rdavcore 0.8.8-dev8
* - Added log option
* - Changed sensor main display
* - Added chart
* - Added Soltek NV400-L64
* - Changed preset editor
* - Fixed issue creating two AutoFSB entries with same name
* - Added shutdown control
* - Use multiplier calculation when > 12.5
* - Added Winbond W83627THF sensor
* - Added detection of I/O addresses for nVidia SMBUS
* - Added Gigabyte GA-7NNXP
* - Added Gigabyte GA-7N400 Pro
* - Added temperatures to system tray
* - Added Asus A7N8X v2.0 Deluxe
*
==========================================================================

==========================================================================
* 8/30/2004: 8rdavcore 0.8.8-dev7
* - Fixed doubled sensor list when changing the mainboard
*
==========================================================================

==========================================================================
* 8/30/2004: 8rdavcore 0.8.8-dev6
* - Added Acorp NFU400N/Jetway N2PA
*
==========================================================================

==========================================================================
* 8/30/2004: 8rdavcore 0.8.8-dev5
* - ATXP1: Fixed reading of VCore when set to Auto in BIOS
* - Fixed control trackbar intervall when changing from FSB->X
* - Fixed displaying 0V voltages reported by SMI_SENSOR
*
==========================================================================

==========================================================================
* 8/29/2004: 8rdavcore 0.8.8-dev4
* - Changed sensor log file format to csv
* - Added VDimm, VAgp for MSI K7N2 (thanks to Core_Z)
* - Fixed A7N8X entry in ini-files to Asus A7N8X-E
* - Added setting "FSB delay"
*
==========================================================================

==========================================================================
* 8/28/2004: 8rdavcore 0.8.8-dev3
* - Disabling AutoFSB before suspend
* - Added VCore to the command line list
* - Added "Save settings" button
* - Fixed install of GiveIO after uninstall without reboot
* - Disabling AutoFSB on manual changes
*
==========================================================================

==========================================================================
* 8/26/2004: 8rdavcore 0.8.8-dev2
* - Changed SMI code to check I/O address
* - Fixed typo in controls.ini
* - Fixed setting of StopGrant bit
*
==========================================================================

==========================================================================
* 8/26/2004: 8rdavcore 0.8.8-dev1
* -------------------------------
* - Added sensor PWM values to controls until AutoFAN is finished
* - Fixed CPU speed calculation when multiplier is .5
* - Added SMI recognition when BIOS returns function code on success
*
==========================================================================

==========================================================================
* 8/25/2004: 8rdavcore 0.8.8-dev
* ------------------------------
* - Hmm, nearly 95% of code rewritten ;)
* - Supports BIOS interface from NVidia(R), so if the NVSU
*   works on your board, you can also get 8rdavcore running
* - Settings now based on config-files
* - New hardware sensor page
* - Logging of sensor values
* - New AutoFSB-code, now supports multiple combinations of triggers
* - New Preset-code, all settings can be included in a preset
* - Setting of a preset before system suspend or exit is possible
* - Display of the SMART drive health parameters
* - Some other things I forgot...try it ;-)
*
==========================================================================